SiTime Application Notes
AN10002 Termination Recommendations for Single-ended Oscillator Driving Single or Multiple Loads
AN10005 Spread Spectrum Clock Oscillators
AN10006 Best Design Layout Practices
AN10002 Termination Recommendations for Single-ended Oscillator Driving Single or Multiple Loads
AN10005 Spread Spectrum Clock Oscillators
AN10006 Best Design and Layout Practices
AN10007 Clock Jitter Definitions and Measurement Methods
AN10020 Definitions of VCXO Specifications
AN10021 VCXO Parameter Trade-offs for PLL Design
AN10022 Rise and Fall Time Selection for SiT8103, SiT8003, and SiT9003
AN10025 Reliability Calculations for SiTime Oscillators
AN10026 Jitter Budget for 10GbE with SiT9120/1
AN10028 Probing Oscillator Output
AN10029 Output Terminations for Differential Oscillators
AN10033 Frequency Measurement Guidelines for Oscillators
AN10037 Optimized SiT15xx Drive Settings for 32 kHz Inputs of Low Power MCUs
AN10039 TCXO Frequency Stability and Frequency Accuracy Budget
AN10040 SiT1532-32kHz XO Frequency Stability.pdf
AN10041 Designing with the SiT39xx Family of DCXOs (Digitally Controlled Oscillators)
AN10043 Measurement Guidelines for 32 kHz SiT15xx Oscillators
AN10046 Driving Multiple Loads with 32 kHz Nano-Power MEMS Oscillators
AN10050 I2C/SPI Programmable Oscillators
AN10052 IEEE 1588 Precision Time Protocol (PTP) in ITU-T Standards
AN10061 Inphi PAM4 Performance when Driving Shared Reference Clocks
AN10062 Phase Noise Measurement Guide for Oscillators
AN10063 TCXO and OCXO Stability Degradation
AN10064 Improved System Performance with Digital Frequency Tuning in Precision Super-TCXOs
SiTime Articles
How To Use MEMS OCXOs To Overcome Timing Challenges
Rev-1.1